Skip to Main Content »

Need Help? Call Our Team: 01257 426466 Email Us: sales@sonicfs.com
Supply, Installation & Maintenance

You are currently on:

    • Product Ziton Z-DP High performance duct smoke unit c/w ZP7-SB1 base and probes successfully added to compare list

Ziton Z-DP High performance duct smoke unit c/w ZP7-SB1 base and probes

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Ziton Z-DP High performance duct smoke unit c/w ZP7-SB1 base and probes

Be the first to review this product

Availability: In stock.

£ 127.40
Add Items to Basket
OR

Quick Overview

X3200- Duct smoke detector

Product Description

Ziton Z-DP High performance duct smoke unit c/w ZP7-SB1 base and probes


X3200- Duct smoke detector


The Ziton X3200 duct probe unit, enables an analogue sensor to monitor the contents of extract ducting, be unaffected by dust and dirt in the air flow and be accessible for maintenance. The Ziton X3200 detector consists of an ABS moulding with clear lid containing upstream and downstream sensing enclosures, wiring terminals, together with an appropriate base for the selected sensor.


Continuous air sampling - Fixing externally to the vertical wall of the duct, the housing supports two sampling probes that penetrate horizontally, into the airflow, through holes cut in to the ducting side. The upstream sampling tube is perforated and its end sealed by an end cap. The downstream tube is shorter and provided with a 40 degree chamfer.


Air is drawn into the sensing enclosures through the upstream probe and is exhausted back into the airflow via the downstream chamber and probe. The Ziton X3200 detector unit enclosure and probes are hermetically sealed, creating a difference in pressure between the upstream and downstream chambers. The air sample is continuously directed through the sensor chamber by a baffle moulded exactly to the sensors profile.


LED alarm indication - To perform correctly the probe should be positioned in a straight run of ducting, at least 6 times the duct width from any bend or branch. Where branch ducts from separate rooms run into a single extract, probe units should always be located on each of the branches in order to avoid smoke from one branch being diluted with clean air from other branches.


Sensors or detectors are fitted into the unit by twist and lock bases and a red LED indicator on the units housing confirms when the detector is in alarm. Terminals are provided for loop or zone wiring and a remote LED connection.


X3200 Standard Features:



  • Effective operation

  • Uses standard sensor or detector

  • Separate termination chamber

  • Red alarm indicator

  • Easy to maintain and service


Additional Information

Model No X3200
 

My Basket

You have no items in your shopping basket.

Compare Products - 61 Items

  1. Remove This Item Ziton ZP3 1 loop analogue control panel, 230V, EN54 approved
  2. Remove This Item Ziton ZP3 2 loop analogue control panel, 230V, EN54 approved
  3. Remove This Item Ziton ZP3 4 loop analogue control panel, 230V, EN54 approved
  4. Remove This Item Ziton ZP3 Repeater panel, 24V (LCD & controls)
  5. Remove This Item Ziton ZP3 Lite 1 loop analogue control panel, 230V, EN54 approved
  6. Remove This Item Ziton ZP3 Lite Package 1 inc 1 X ZP3 Lite FAP & 50 X ZP730 sensors and bases
  7. Remove This Item Ziton ZP3 Network interface board
  8. Remove This Item Ziton ZP3 Class A network loop card
  9. Remove This Item Ziton ZP3 Serial communication board (RS232)
  10. Remove This Item Ziton ZP3 8 way monitored alarm driver board
  11. Remove This Item Ziton ZP3 8 way relay board
  12. Remove This Item Ziton ZP3 8 way input board
  13. Remove This Item Ziton ZP3 24 way transistor output board
  14. Remove This Item Ziton ZP3 Serial control bus interface board
  15. Remove This Item Ziton ZP3 Integral printer for ZP3 panel
  16. Remove This Item Ziton ZP3 Integral modem on ZP3-ACC-MP mounting chassis
  17. Remove This Item Ziton ZP3 Auxiliary chassis plate for MA8 / RL8 / MIP8 / OP24 / NLM (3 max)
  18. Remove This Item Ziton ZP3 Flushing collar for ZP3 panel
  19. Remove This Item Ziton 1 loop ZP3 motherboard on chassis
  20. Remove This Item Ziton 4 loop ZP3 motherboard on chassis
  21. Remove This Item Ziton CPU for ZP3 (1MB)
  22. Remove This Item Ziton Replacement ZP3 Lite keypad
  23. Remove This Item Ziton Replacement 4 key pack for ZP3 panel
  24. Remove This Item Ziton Replacement ZP3 printer roll
  25. Remove This Item Ziton Replacement ZP3 printer ribbon
  26. Remove This Item Ziton ZP3 address labels 1001-1127
  27. Remove This Item Ziton ZP3 address labels 2001-2127
  28. Remove This Item Ziton ZP3 address labels 3001-3127
  29. Remove This Item Ziton ZP3 address labels 4001-4127
  30. Remove This Item Ziton ZP700 Optical sensor
  31. Remove This Item Ziton ZP700 Heat sensor (ZP3 Version 1.XX & 2.XX software streams)
  32. Remove This Item Ziton ZP700 Heat sensor (ZP3 Version 3.XX software stream)
  33. Remove This Item Ziton ZP700 Combination sensor (optical & heat)
  34. Remove This Item Ziton ZP700 Ionisation sensor
  35. Remove This Item Ziton ZP700 Surface mounting sensor base
  36. Remove This Item Ziton ZP700 Recessed sensor base
  37. Remove This Item Ziton Deep mounting for ZP7-SB1 base
  38. Remove This Item Ziton ZP7 Flush mounting red analogue callpoint c/w EN54 marking
  39. Remove This Item Ziton ZP7 Callpoint Red surface box
  40. Remove This Item Ziton ZP7 Callpoint EN54 universal glass no logo (10 pack)
  41. Remove This Item Ziton ZP7 Callpoint Resettable element (EN54 marking)
  42. Remove This Item Ziton ZP7 Callpoint Pack of 10 test keys
  43. Remove This Item Ziton ZP7 Callpoint Transparent protective hinged cover
  44. Remove This Item Ziton ZP7 Weatherproof surface mounting red analogue callpoint (IP67)
  45. Remove This Item Ziton Transparent protective hinged cover for ZP7 weatherproof callpoint
  46. Remove This Item Ziton Pack of 5 hinged cover seals for ZP7 weatherproof callpoint
  47. Remove This Item Ziton ZP755 Surface mounting addressable base sounder (90 dBA)*
  48. Remove This Item Ziton ZP755 Omnidirectional sounder beacon, red (102 dBA)*
  49. Remove This Item Ziton ZP755 Surface mounting addressable base sounder beacon, white (90 dBA)*
  50. Remove This Item Ziton White Pluggable base for ZP755 -2 and -3 devices
  51. Remove This Item Ziton Red Pluggable base for ZP755 -2 and -3 devices
  52. Remove This Item Ziton ZP755 Surface mounting beacon, white with clear lens
  53. Remove This Item Ziton ZP755 Surface mounting base, white (for ZP755V remote power requirement)
  54. Remove This Item Ziton Cover for all ZP755B base sounder with no detector, red
  55. Remove This Item Ziton Cover for all ZP755B base sounder with no detector, white
  56. Remove This Item Ziton ZP755 Weatherproof horn sounder, red (105 dBA)
  57. Remove This Item Ziton ZP3 50 metre loop powered analogue reflective beam detector
  58. Remove This Item Ziton ZP3 100 metre loop powered analogue reflective beam detector
  59. Remove This Item Ziton ZP3 100 metre loop powered analogue end to end beam detector
  60. Remove This Item Ziton Z-DP High performance duct smoke unit c/w ZP7-SB1 base and probes
  61. Remove This Item Ziton ZR454 Wireless Alarm Sounder
Clear All
Click here for information regarding our prices
Click here for Fire Installation information
Click here for Fire Maintenance information
Click here for Security Installation information
Click here for Security Maintenance information
Click here for Sub-contract information