Ziton ZP700 Surface mounting sensor base

ZP7-SB1 - Analogue sensor base - surface mounting

Simple twist and lock action - The Ziton ZP7-SB1 common mounting base, allows any ZP700 analogue sensor to be removed or replaced without disconnecting loop wiring from sensor terminals. Sensors plug into the base unit with a simple twist and lock action, allowing quick and easy removal for cleaning and servicing, or reselection of device type should the usage of the protected area change. Forming an integral part of the overall sensor assembly, the Ziton ZP7-SB1 sensor base are provided with slots for screw fixing direct to ceiling structures, or to auxiliary wiring plates, or conduit boxes with screw fixing centres between 50 mm and 90 mm.

Robust wiring terminals - The Ziton ZP7-SB1 Base features robust wiring terminals with captive clamping washers to ensure secure wiring termination. The bases are of shallow design with ample space to accommodate cables of all types. Terminals are provided inside the moulding for loop connections and the termination of cable screening. Provision is also made for the connection of a remote LED when required.

Automatic locking option - In order to prevent unauthorised removal of a device from its base, an automatic locking breakout is incorporated into of all sensor mouldings. If the breakout is removed, sensors can then only be released from their bases by use of a Ziton detector head picker (Z-PH-2). The locking facility is an easily applied option, often taken on site, at the system commissioning stage.

Matching spaces for address labels are provided on sensor and base mouldings - ensuring that when removed, devices are replaced in the correct location. The address number facility also enables sensors to be easily identified when viewed from
floor level.

ZP7-SB1 Standard Features:

• Common to all Z700 series detectors


• Automatic locking option


• Address identification label


• Ease of installation