Ziton ZP7 Flush mounting red analogue callpoint c/w EN54 marking

ZP785-3 - Addressable callpoint

Modern stylish design - The Ziton ZP785-3 is an addressable call point of stylish design, providing a manual means of initiating a fire alarm on ZP3 analogue addressable systems. Complying with EN 54 Part 11, the Ziton ZP785-3 is suitable for installations meeting the recommendations of many local codes (e.g. BS 5839 Part 1).

The ZP785-3 unit is operated either by pressing a resettable element (EN54 Part 11) or by breaking a frangible glass with finger pressure. Glass elements have clear vinyl coatings on the front surface to prevent operator injury and to inhibit the release of loose fragments as the glass is broken. Both operating elements are easily interchangeable.

Plug in loop connection - Installed as part of the ZP3 analogue addressable system, up to 127 devices (call points, sensors and interface units) can be connected to each of the control panel loops. All loop devices incorporate switch settings enabling them to be assigned a unique address, which is polled by the panel every two seconds.

Ziton ZP785-3 callpoints are designed for semi recessed fixing, using a standard single gang socket box, or can be surface mounted by means of a Z-CPSB-1 matching plastic back box. Push in terminals enable the device to be plugged directly into the loop, making replacement simple and reducing internal cable ends to a minimum. System testing, glass replacement and reset are carried out by using a special maintenance tool enabling part of the front mouding including the glass, to be lowered, allowing the device to operate.

Polycarbonate front cover option - Rated at IP24 the Ziton ZP785-3 moulding is constructed of ABS plastic and intended for indoor applications. A red LED indicator is prominently positioned on the front of the unit, which illuminates when the device is operated. For locations where malicious operation, or accidental impact from flying objects may occur (for example sports halls), operation can be restricted by the addition of a clear, polycarbonate, front cover (Z-MCP-HC), which can be further protected by a cover seal (Z-MCP-HCS).

ZP785-3 Standard Features:

• Modern stylish design


• Complies with EN54 Part11


• Resettable or frangible operating elements


• Single maintenance tool


• Plug in loop connection